AUTOMATIC CONTROL SYSTEM OF PRESSING EQUIPMENT PARAMETERS
Keywords:
Automatic control system, pressing equipment, parameters, sensors, control algorithms, actuators, precision, efficiency, manufacturing, optimization, process control, human-machine interface (HMI), safety systems, data acquisition, real-time monitoring.Abstract
The topic explores the concept and implementation of automatic control systems within the context of pressing equipment parameters in manufacturing processes. It delves into the necessity for precision in manufacturing operations, highlighting the challenges posed by manual control methods and the potential for human error. The annotation discusses the pivotal role of automatic control systems in addressing these challenges, emphasizing their integration of sensors, control algorithms, and actuators to achieve real-time monitoring and adjustment of critical parameters such as pressure, temperature, and force. Furthermore, it underscores the significance of these systems in enhancing not only precision and efficiency but also safety, waste reduction, and adaptability to changing production requirements. The annotation concludes by positioning automatic control systems as catalysts for innovation and excellence in modern manufacturing practices.
References
Li, Z., Guo, D., Wang, J., & Cheng, G. (2020). Automatic Control System Design of Hydraulic Press Based on PID Control Algorithm. In 2020 IEEE 3rd International Conference on Information Systems and Computer Aided Education (ICISCAE) (pp. 305-308). IEEE.
Atli, A., & Karakose, M. (2020). Automatic Control System for Metal Stamping Processes. In Proceedings of the 1st International Conference on Industrial Engineering and Operations Management (pp. 1140-1147). Springer.
Cao, Y., Zheng, X., & Wang, C. (2019). Research on the Automatic Control System of Hydraulic Press Based on PLC Technology. In 2019 3rd International Conference on Intelligent Transportation Engineering (ICITE) (pp. 1153-1156). IEEE.
Mukherjee, S., & Ray, S. K. (2020). Automation of Pressing Equipment in Sheet Metal Forming Process Using Programmable Logic Controller (PLC) and Human Machine Interface (HMI). In Emerging Trends in Advanced Manufacturing Systems and Process Automation (pp. 147-157). Springer.
Liu, L., Zhang, Y., & Chen, X. (2020). Development of an Automatic Control System for a Hydraulic Press Machine. In 2020 5th International Conference on Electrical and Electronics Engineering (ICEEE) (pp. 1-4). IEEE.
Zhang, X., Ma, S., & Yan, X. (2018). Development of an Automatic Control System for Pressing Process Based on Fuzzy PID Control. In 2018 IEEE International Conference on Information Technology, Control and Automation (ITCA) (pp. 147-150). IEEE.
Ferreira, P., & Nunes, P. (2019). Automatic Control System for Hydraulic Press. In Proceedings of the 11th International Conference on Mechanical and Intelligent Manufacturing Technologies (pp. 479-488). Springer.
Choudhury, I. A., Rahman, M. A., & Rizwanul, H. M. (2019). Design and Implementation of Automatic Control System for Hydraulic Press. In 2019 4th International Conference on Electrical Information and Communication Technology (EICT) (pp. 1-5). IEEE.
Abdusamat K., Mamatovich A. S., Muhammadziyo I. Mathematical Modeling of the Technological Processes Original Processing of Cotton //International Journal of Innovation and Applied Studies. – 2014. – Т. 6. – №. 1. – С. 28.
Mardonov B., Tadaeva Y., Muhammadziyo I. Experimental and theoretical studies of vibrational motion of raw cotton on inclined mesh surface //International Journal of Innovation and Scientific Research. – 2014. – Т. 9. – С. 78-85.
Karimov A. I., Ismanov M. Mathematical Modeling of Heat Flux Distribution in Raw Cotton Stored in Bunt //Engineering. – 2020. – Т. 12. – №. 08. – С. 591-599.
Muhammadziyo I. Research Of Characteristics And Analysis Of Calculations Of Optoelectronic Hydrometers Of Automatic Control //Solid State Technology. – 2020. – Т. 63. – №. 6. – С. 14910-14916.
Ismonovich K. A., Abdusamatugli I. M. Modeling the Method of Linear Approximation of Signals in SPLC (Sensor Programmable Logic Controller) //International Journal on Orange Technologies. – 2021. – Т. 3. – №. 10. – С. 55-59.
Mukhammadziyo I. et al. Theoretical and experimental study of the law of distribution of non-stationary heat flux in raw cotton stored in the bunt //AIP Conference Proceedings. – AIP Publishing, 2023. – Т. 2789. – №. 1.
Magistr M. X. DATA COLLECTION SYSTEM IN THE MANAGEMENT OF TECHNOLOGICAL PROCESSES //International journal of advanced research in education, technology and management. – 2023. – Т. 2. – №. 6.
Karimov A., Ismanov M. ANALYSIS OF ERRORS OF OPTOELECTRONIC MOISTURE METERS //International journal of advanced research in education, technology and management. – 2023. – Т. 2. – №. 5.
Ismonovich K. A. et al. Design Of Programmable Logic Controllers To Adjust The Temperature In The Temporary Storage Buns Of Cotton //Journal of Pharmaceutical Negative Results. – 2022. – С. 3038-3043.
Ismonovich K. A., Rasuljonovich H. U., Muhammadziyo I. 3rd International Conference and Exhibition on Materials Science & Engineering //Materials Science. – 2014. – Т. 2014.
Ismanov M., Karimov A. The action of shock waves on cylindrical panels //AIP Conference Proceedings. – AIP Publishing, 2024. – Т. 3045. – №. 1.
Qodirov D., Ismanov M. Stable algorithms for the identification of delayed control objects based on input and output signals //AIP Conference Proceedings. – AIP Publishing, 2024. – Т. 3045. – №. 1.
