OPTIMIZATION OF TECHNICAL INDICATORS OF A POTATO HARVESTING MACHINE USING THE METHOD OF MATHEMATICAL PLANNING

Authors

  • SALOKHIDDINOV NURMUKHAMMAD Namangan State Technical University

Keywords:

from the center escape elevator, excavator, mathematician planning, regression equation, soil termination, termination damage, optimization.

Abstract

 In the article from the Centrifugal Lifting Rod Elevator (CLRE) equipped potato backhoe loader worker parameters mathematician planning method using optimization results. The experiments are based on the Hartley-4 plan. Based on held, four incoming factor (drum) rotations number, elastic drum width, elevator speed, worker (of) soil communication rate (Y1, %) and of the nodes damage (Y2, %) impact learned. Obtained second level regression the equations are Fisher and Student criteria based on checked. Optimization as a result of the car high efficiency provider acceptable values detected: drum rotations number of 120 rpm, elevator speed 0.94 m/s, working slot 0.010 m. Field tests as a result soil 81.62% penetration, nodes damage by 5.74% reached. These indicators to the traditional KKS-1.4 combine 10-12% higher than efficiency provides.

References

Salokhiddinov Nurmukhammad Sotimboevich WAYS TO IMPROVE THE EFFICIENCY OF A POTATO HARVESTING MACHINE. International scientific and technical journal “SCIENCE AND INNOVATIVE DEVELOPMENT”. Volume 8 | Issue 5 | September – October 2025. pp.111-117.

Hamatov M., Adolatov B. Village farm their cars test and parameters mathematician planning method with Determination: Monograph . – Tashkent: Science, 2018. – 242-243 p.

Nishonov F.A., Saloxiddinov N.S. and etc. Problems I solution assembly agricultural archive // Bulletin Nauki I Tvorchestva . – 2022. – No. 1 (73). - 22-27 p.

Kadirovich P.G, Satimbaevich S.N. Application of oscillating shares in machines for harvesting potatoes // NVEO journal. - 2021. - pp. 2664-2672.

PLANEX software complex user manual . – NamMTI , 2010.

Patent of the Russian Federation, No. 2048726.

Muradovich, R. R., & Satimbaevich, N. (2020). Basic Equations Of Motion Of A Material Particle In A Lifting Centrifugal-Separating Bar Elevator. Solid State Technology, 63(5), 3129-3133.

Saloxiddinova M. N., Muradov R. M., Saloxiddinov N. S. Ways to overcome the defects of the cotton separator vacuum valve. 85-87

Downloads

Published

2026-04-13

How to Cite

SALOKHIDDINOV NURMUKHAMMAD. (2026). OPTIMIZATION OF TECHNICAL INDICATORS OF A POTATO HARVESTING MACHINE USING THE METHOD OF MATHEMATICAL PLANNING. Ethiopian International Journal of Multidisciplinary Research, 13(4), 1003–1006. Retrieved from https://www.eijmr.org/index.php/eijmr/article/view/6105